WIKA S-10 pressure transmitters are precision engineered to fit most industrial pressure measurement applications. The compact, rugged design makes these instruments suitable for applications including hydraulics and pneumatics, vacuum, test equipment, liquid level measurement, press control, compressor control, pump protection and numerous other processing and control operations. A wide range of electrical connection and process connection options are available to meet almost any requirement. The S-10 features an all-welded stainless steel measuring cell for improved media compatibility. There are no internal soft sealing materials that may react with the media or deteriorate over time. The compact case is also made of stainless steel and is available with environmental protection ratings up to NEMA 6P / IP 68. Shock resistance: 1000g according to IEC 60068-2-27 (mechanical shock); Vibration resistance: 20g according to IEC 60068-2-6 (vibration under resonance). Wiring protection: Protected against reverse polarity, overvoltage and short circuit. Weight: Approx. 0.4lb. L-connector, DIN EN 175301-803, Form A (DIN 43 650) for conductor cross section up to max. 1.5 sq mm, conductor outer diameter 0.3" (6-8 mm). Supply voltage: 10-30 VDC. Process connection: 1/2 NPT male. Electrical connection: DIN EN 175301-803 (DIN 43 650) with plug connector. Piezoresistive sensor and thin-film sensor technology. 4-20 mA 2-wire output signal, others available.