These Urethane band saw tires are designed to fit any machine that requires a 1/2 inch by
0.095 inch by 9 inch bandsaw tire.

Black & Decker: BDBS100, BS700 Craftsman:

137.21409, 113.24458, 315.214770, 315-214590 Delta: 28-150, BS100, SM400 Grizzly:
G1052 ProTech: 3203 Ryobi: BS 101, BS901Shopfox: W1749, W1750, T20837.


Fits certain models of Tradesman, Skil and Delta as well! This isn’t an exhaustive list. This is not
an exhaustive list and is meant for Band Saw that requires a ½” wide by 3/32” thick tire.

There’s no need to use adhesive with these as the Urethane material stretches to fit the wheel.
This makes for easier installation and removal. We suggest soaking in hot water before
installation to make material more pliable.

Urethane is known to outlast the factory tires, or the replacement plastic or rubber tires.
It doesn’t dry out which extends its life.

How to Install Your Urethane Band Saw Tires:

-Make sure to unplug your band saw while changing any parts or servicing it.
-Urethane band saw tires don’t require adhesive, but they do need to be stretched on.
-Remove the old tires, and clean the machine of any dirt, debris, or adhesive.
-The smaller tires can be fitted by stretching them on by hand.
-If you can’t get the tires on by hand stretching them, clamp the tires to the wheel. Work the tire around the wheel in
both directions and add clamps as you go.
-A dowel rod or smooth tool can be used to pry the tire on.
-Once the tire is securely on the wheel, the stretch will need to be smoothed out.
-With a dowel between the tire and the wheel, roll it around the entire wheel.

-More detailed versions of instructions can be found by searching for
“urethane bandsaw tire installation” online.